Flexographic Printing

Home > Products > Printing Machines > Flexographic Printing - Standard Type / Off-Line Operation > 2 Colours Printing

Standard Type / Off-Line Operation
2 Colours Printing / HP-FG Series (PRINTING SPEED UP TO MAX.85 METERS/MIN.)

photo of Standard Type / Off-Line Operation - 2 Colours Printing

Main Features:

  1. Cast iron machine frame design, very smooth operation maximum speed operation.
  2. The main motor is ac motor; its speed is controlled by Japan made 'Yaskawa' brand inverter.
  3. All the driving gears are treated with grinding & polishing to achieve very stable & silent operation, long lasting and accurate colors registration.
  4. All the anilox rollers are with 300 lpi to ensure very clear & clear & beautiful printing.
  5. All the guide rollers, plate cylinders, steel rollers, anilox rollers are treated with dynamic balance checking & chrome-plated.
  6. Using hydraulic system to set and adjust the plate cylinders.
  7. When the plate cylinders stop running, the ink rubber rollers and anilox rollers will be continuously rotating to avoid the ink to be stuck on such rollers.
  8. Using hot (with 2 steps auto-temperature controller) and cold air drying system simultaneously to achieve fast ink drying.
  9. Equipped with 'film exhaustion scanner' on unwinding section, so if the film roll runs out, the machine will stop automatically.
  10. Equipped with 'clutch device' on each printing section, so if the colors registration is out during the machine's running, the operator can do the adjustment immediately just to push the button of 'clutch device' without stopping the machine.
  11. Equipped with 'torque motor with controller' on the rewinding section to achieve very smooth & beautiful film rewinding.

Specifications:

Model HP-FG600-2 HP-FG800-2 HP-FG1000-2 HP-FG1200-2 HP-FG1400-2
Printing Speed (Max.) 85 M/Min. 85 M/Min 80 M/Min 80 M/Min 80 M/Min
Printing Width (Max.) 600 MM 800 MM 1000 MM 1200 MM 1400 MM
Film Passing Width (Max.) 700 MM 900 MM 1100 MM 1300 MM 1500 MM
Printing Length 7"-45" 7"-45" 7"-45" 11"-45" 11"-45"
Printing Available 0+6, 1+5, 2+4, 3+3
Main Motor (Ac Motor) 3 HP 3 HP 3 HP 5 HP 5 HP
Inverter
(For Main Motor Speed Control)		 3 HP 3 HP 3 HP 5 HP 5 HP
(Made in Japan, "Yaskawa" Brand)
Heater 18 Kw 18 Kw 18 Kw 24 Kw 24 Kw
Drying Blower 2 HP x 1 2 HP x 1 2 HP x 1 3 HP x 2 3 HP x 1
Hydraulic Pump Motor 1 HP 1 HP 1 HP 1 HP 1 HP
Ink Roller Motor 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Torque Motor 30Kg-cmx2 30Kg-cmx2 30Kg-cmx2 50Kg-cmx2 50Kg-cmx2
Total Power Required 28 Kw 28 Kw 28 Kw 30 Kw 30 Kw
Relative Product:
Copyright© HYPLAS Machinery Co., Ltd.

Office: 7F-A, NO. 230, SEC. 4, CHUNG-HSIAO EAST ROAD, TAIPEI, TAIWAN 106
TEL: 886-2-2778-2985 / FAX: 886-2-2731-5179

Factory: DA YUAN INDUSTRIAL PARK, NO. 277, CHUNG SHAN NORTH ROAD, DA YUAN SHIANG, TAOYUAN 337, TAIWAN.
TEL: 886-3-386-5778(8 LINES) / FAX: 886-3-386-5389
- top -